UNI Filter Pro Comp 2 Air Filter KTM / HUS / GAS  : (16-22)  KTM  SX/SXF/XC/XCF   (16-22)  HUS  FC/FX/TC/TX , (17-C)    KTM  EXC/EXCF/XCW   (17-C)   

• Genuine two stage filter, Two filters in one. Layers can be separated.
• Layers are not bonded to provide maximum air flow. Both layers are made using a fine grade of foam. Maximum air flow & Maximum filtration.
• The corrugated profile cut outer layer provides 2X the surface area for increased filtering capacity.
• Double Ultra-Soft seal
• Soft Polyurethane grommets. (Not plastic which in turn provides a perfect seal on the cage) The grommets also seal against the inner foam layer.
• Filter Cage Wear Patch on the inner filter – The original style filters are prone to wear where they come in contact with the centre support on the cage.
• Designed and Made in Australia for Australian conditions!

Unifilter's Procomp2 Two Stage Air Filter is the largest air filter available for the KTM, Husqvarna & Gas Gas MX,SX & Enduro ranges.

Unifilter's Corrugated outer layer provides 2X the surface area or the original air filter. This provides much higher dirt holding capacity while providing maximum air flow.

The separate inner filter provides acts as a safety stage in extreme dusty conditions and provides a perfect seal around the air filter cage locating pins.

The polyurethane locating grommet is soft and flexiable allowing for a perfect fit arount the support cages locating pins. It also seals against the inner layer of the air filter

Unifilter has added a wear pad to the inside of the filter. This protects the foam from wearing against the support cage which is very common on the KTM, Husqvarna and Gas Gas original filters.