Scotts Steering Damper Yamaha Mount Kit SUB (4733) WR 250R 2008-> Current. Dirtbike Australia

Calculate Shipping

Standard Shipping Toll - $19.00

Australia Post - $20.00
Express Post

Scotts Mount Kit Yamaha (4733) (SM 100 10 11) Sub O/S Bar WR 250R 2008-> (+8mm Link Arm)

Description

This shows the SUB mount (Stabilizer Under Bars) mounted to the stock triple clamps. Photo shows the parts in silver for distinction, but the actual parts you receive will be Black anodized. This kit raises the bar position height about 25mm but retains the same distance from the rider forward to the bars. This kit requires oversize bars and or bar reducers if you want to retain your stock handlebars, both of which are available here online via the "Product line" listing on the home page. Each kit comes complete with all necessary hardware, step by step pictured instructions and Owner's Manual. This kit is a very nice addition to this bikes quick handling and steep head angle.

"SUB" mount stands for Stabilizer Under Bars, originally designed for raising the bars. These kits are designed for use with Oversize bars. "Bar reducers" are available as an option, to convert the kit to standard diameter bars, should that be desired. This concept allows more room for other equipment such as, Global Positioning Systems(GPS) or Enduro/Rally computers and yet still retain the quick access for adjusting the stabilizer. This is also good for the taller rider who wants his bars a little higher, as it raises the bar location approximately 11-25mm, depending on the model of bike. In some cases, you might consider a lower bend handlebar bend at the same time, unless you are trying to achieve a higher bar height along with your stabilizer installation. We can also help you with other handlebar choices to match your desired setup, as we have a full selection of handlebars to choose from on this website. The SUB mounts are only available on certain models based on the physical limitations of mounting in this area. Each SUB mount comes complete with all necessary parts, hardware and "Step by Step" pictured instructions. If you have any questions, feel free to call or email us. The Photo attached here may be a generic photo to show you the basic components in the kit, but may not be showing the exact kit for your specific bike.

Scotts Mount Kit Yamaha (4733) (SM 100 10 11) Sub O/S Bar

WR 250R 2008-> Current

(+8mm Link Arm) required. Supplied when Damper is purchased or available seperately.

****Please phone 02 4872 4222 for more information and pricing****